How To Use Holts Wondarweld Heavy Duty Crack Repair
How to Use Holts Wondarweld Heavy Duty Crack Repair
If you have a small crack or leak in your engine block, cylinder head gasket, or water pump gasket, you may be able to fix it with Holts Wondarweld, a professional cooling system repair product that seals the damage and restores the integrity of the engine and cooling system. In this article, we will explain what Holts Wondarweld is, how it works, and how to use it safely and effectively.
DOWNLOAD: https://tinurll.com/2w4cIB
What is Holts Wondarweld?
Holts Wondarweld is a heavy-duty crack repair product that is designed to fix small holes and cracks in engine blocks, cylinder head gaskets, and water pump gaskets. It is suitable for all engine types, including steel, iron, and aluminium engines. It does not clog or damage the system, and it prevents the need for an expensive engine rebuild. Holts Wondarweld is available in 250 ml and 500 ml bottles . A 250 ml bottle is sufficient for cooling systems up to 8-litre.
How does Holts Wondarweld work?
Holts Wondarweld works by circulating through the cooling system and seeking out small holes, cracks, and leaks to form a permanent repair. It is added directly to the cylinder head outlet, where it bonds with the metal and seals the damage. It is lab-developed to ensure maximum performance and longevity.
How to use Holts Wondarweld?
Before using Holts Wondarweld, you need to drain the cooling system and flush it with Cooling System Flush to remove any residue and contaminants left behind by the old coolant. After draining, reattach the bottom hose. To use Holts Wondarweld, follow these steps:
Remove the top hose from the cylinder head outlet and remove the thermostat.
Use a funnel to pour Holts Wondarweld directly into the cylinder head outlet. Do not pour into oil as this can cause serious engine damage .
Replace the thermostat and top hose.
Refill the system with clean water and run the engine for 15 minutes to repair the leak.
When the repair is complete and no fluid is leaking, drain the system again, flush with clean water, and then top up with a high-quality coolant/antifreeze product.
Note: You must remove the thermostat before using Holts Wondarweld, as it is applied directly to the cylinder head outlet. If you do not remove the thermostat, the product will not reach the damaged area and will not work properly .
Warnings and precautions
Holts Wondarweld is a safe and effective product when used correctly, but you should always read the instructions carefully before using it. Here are some warnings and precautions you should be aware of:
Holts Wondarweld causes skin irritation and serious eye irritation. Wear protective gloves and eye protection when handling it. If it gets on your skin or eyes, rinse thoroughly with water. If irritation persists, seek medical advice.
Holts Wondarweld is flammable. Keep away from heat, sparks, open flames, and hot surfaces. Do not smoke when using it. Store in a well-ventilated place away from direct sunlight.
Holts Wondarweld is harmful if swallowed. Do not ingest it. If swallowed, rinse mouth and drink plenty of water. Do not induce vomiting. Seek medical attention immediately.
Holts Wondarweld is only suitable for small cracks and leaks in engine blocks, cylinder head gaskets, and water pump gaskets. It will not fix large or severe damage or other types of leaks in the cooling system .
Holts Wondarweld is not compatible with antifreeze. You must drain and flush the cooling system before and after using it, and then refill it with a fresh coolant/antifreeze mixture .
Conclusion
Holts Wondarweld is a professional cooling system repair product that can help you fix small cracks and leaks in your engine block, cylinder head gasket, or water pump gasket. It is easy to use, safe for all engine types, and provides a permanent repair without the need for an engine rebuild. However, you must follow the instructions carefully and take the necessary precautions when using it. If you have any questions or doubts about using Holts Wondarweld, consult a professional mechanic or contact Holts customer service.